EN Self-Compensating Shock Absorbers

EN36x25 Hydraulic Shock Absorbers

Model specifications, installation information and technical documents for EN36x25.

EN — Series illustration. Refer to the model drawing for its outline and mounting dimensions.
Series illustration. Refer to the model drawing for its outline and mounting dimensions.
Stroke (mm)
25
Max energy per cycle (Nm/C)
160
Max energy per hour (Nm/h)
91000
Thread size
M36x1.5

Model specifications

Performance and key specifications

Stroke (mm)
25
Optimal velocity range (m/s)
0.08-16
Max energy per cycle (Nm/C)
160
Max energy per hour (Nm/h)
91000
Max impact force (N)
11120
Max thrust force (N)
3100
Series catalog temperature, optional fluid and seals (°C)
-40 … 100
Series catalog temperature, standard configuration (°C)
-10 … 80
CMS mounting · Dimension U (mm)
23
CMS mounting · Dimension S (mm)
38
CMS mounting · Dimension CR (mm)
11.2
CMS mounting · Dimension L (mm)
234
CMS mounting · Dimension W (mm)
12
CMS mounting · Dimension V (mm)
6

X / Y direction specifications

CMS mounting · Dimension X (mm)
6.1

Dimensions and mounting

Total length (mm)
140.2
Thread size
M36x1.5
Dimension A (mm)
140.2
Dimension WL (mm)
16.0
Dimension D (mm)
9.5
Dimension E (mm)
29.0
Dimension A1 (mm)
145.3
Dimension F (mm)
87.0
Dimension WF (mm)
33.0
Dimension J (mm)
5.3
Dimension E1 (mm)
30.5

Selection and installation

Automation mechanisms and precision motion stops. Match impact speed, effective mass and energy to the selected model.

Series working principle

As the piston travels, it progressively closes metering holes and changes the oil-flow area. A return spring resets the absorber for the next impact.

Catalog application and mounting notes

EN36x25 is a fixed-type hydraulic shock absorber. The EKD catalogue lists a 25.0 mm stroke, 160.0 Nm maximum energy per cycle and 91,000 Nm maximum energy per hour for this model. Its standard body thread is M36 x 1.5. Confirm the damping code, impact velocity, available stopping travel, mounting envelope and actual cycle duty. The capped B version has a different overall length; verify the complete model code before ordering.

Engineering limits to confirm for this model

Published data below describes the model. A missing value needs confirmation; it is never a passed check. Use the cited model drawing and operating conditions when requesting a review.

Published optimal impact velocity range
0.08-16 m/s
Effective mass range
Not established in the published model data — engineering confirmation required
Return time
Not established in the published model data — engineering confirmation required
Return force
Not established in the published model data — engineering confirmation required
Operating temperature
Series catalog temperature, optional fluid and seals: -40 … 100 °C
Series catalog temperature, standard configuration: -10 … 80 °C
Allowable side load or angle
Not established in the published model data — engineering confirmation required
Maximum impact force
11120 N
Maximum thrust force
3100 N

Temperature ranges are series catalog references. Confirm the fluid, seals and ordered configuration; an optional range is not a standard-model rating.

Replacement candidates for referenced models

Model-number relationships are recommendations only. Final selection must be based on the actual operating conditions, mounting and application review.

SMC RB2015

RB

Candidate requires mounting changes or dimensional review

Matched or capacity-qualified fields
Energy per cycle
Different or confirmation-required fields
Hourly energy (derived; not a thermal rating) · Stroke · Body thread · Impact velocity · Allowable drive thrust · Impact / reaction force

SMC RB2725

RB

Candidate requires mounting changes or dimensional review

Matched or capacity-qualified fields
Energy per cycle · Stroke
Different or confirmation-required fields
Hourly energy (derived; not a thermal rating) · Body thread · Impact velocity · Allowable drive thrust · Impact / reaction force

SMC RBL2015

RBL coolant-resistant

Candidate requires mounting changes or dimensional review

Matched or capacity-qualified fields
Energy per cycle
Different or confirmation-required fields
Hourly energy (derived; not a thermal rating) · Stroke · Body thread · Impact velocity · Allowable drive thrust · Impact / reaction force

SMC RBL2725

RBL coolant-resistant

Candidate requires mounting changes or dimensional review

Matched or capacity-qualified fields
Energy per cycle · Stroke
Different or confirmation-required fields
Hourly energy (derived; not a thermal rating) · Body thread · Impact velocity · Allowable drive thrust · Impact / reaction force

SMC RBLC2015

RBL with cap

Candidate requires mounting changes or dimensional review

Matched or capacity-qualified fields
Energy per cycle
Different or confirmation-required fields
Hourly energy (derived; not a thermal rating) · Stroke · Body thread · Impact velocity · Allowable drive thrust · Impact / reaction force

SMC RBLC2725

RBL with cap

Candidate requires mounting changes or dimensional review

Matched or capacity-qualified fields
Energy per cycle · Stroke
Different or confirmation-required fields
Hourly energy (derived; not a thermal rating) · Body thread · Impact velocity · Allowable drive thrust · Impact / reaction force

Questions before ordering

Is an EKD candidate a confirmed drop-in replacement?
No. A candidate needs separate dimensional and application checks. Provide the complete original code, drawing, moving mass, impact speed, drive force, cycle rate and environment. Missing operating limits require written engineering confirmation before approval.
Are price, lead time and warranty the same for every model?
No universal price, dispatch time or warranty duration is established here. Request a written offer for the exact configuration, accessories, quantity and destination, including sample availability, minimum order, shipping, applicable warranty and failure-resolution terms.

Drawings and documents

Open approved PDFs without signing in. Sign in for DWG and STEP files; request formats that are not yet approved.

DWG

STEP

Request model documents →

Specification sources

Specifications follow the current model catalogue, supported by the referenced catalogue pages and the product database model record.

  • EKD full catalogue (Chinese) · pp. 27
  • Product database: corresponding model record