这些计算问题可以直接基于产品知识回答。
这些页面把目录中的计算语言转为工程师可用的直接回答：所需输入、公式、校核点、常见错误以及下一步选型或询盘动作。
从回答到询盘
每个回答页面都连接工程师选型、采购筛选或联系表单，让技术访问者有清晰的转化路径。
What Data Is Needed for Industrial Shock Absorber Calculation?
A practical checklist of the application data needed before sizing an industrial shock absorber.
How to Calculate Impact Energy for an Industrial Shock Absorber
Use moving mass and impact velocity to estimate the kinetic energy that the absorber must handle per cycle.
How to Check Energy per Hour for Shock Absorber Selection
Why the same absorber can pass single-impact energy but fail under high cycle frequency.
How to Estimate Average Impact Force from Energy and Stroke
A simple way to estimate average stopping force before checking catalog force limits.
How to Size a Shock Absorber for Horizontal Linear Motion
Calculate a horizontal moving mass by kinetic energy, then add drive force if the actuator continues pushing.
How to Size a Shock Absorber for Vertical Motion
Add gravity work when the load moves downward into the absorber and subtract it when gravity opposes the stop.
How to Size a Shock Absorber for Rotary Motion
Convert rotary motion into rotational energy and absorber stroke at the contact radius.
How to Use Shock Absorber Selection Curves
What catalog selection curves mean and how they support model or adjustment-setting checks.
应用数据已经准备好？
从文章说明进入计算 shortlist，或发送应用数据做工程复核。