What Data Is Needed for Industrial Shock Absorber Calculation?
A practical checklist of the application data needed before sizing an industrial shock absorber.
直接回答
At minimum, collect motion direction, moving weight, impact velocity, available stroke, drive or thrust force if present, cycles per hour, and temperature or environmental constraints. Heavy-duty custom-orifice buffers also need mounting method and any safety or corrosion requirements.
本页回答的问题
- What data is needed to select an industrial shock absorber?
- What information should I send for a shock absorber RFQ?
- What application data is required for heavy duty buffer selection?
所需输入
计算步骤
- 1
Define the motion
Identify whether the motion is horizontal, vertical, inclined or rotary, because gravity and inertia are handled differently.
- 2
Collect the stopping values
Record moving weight, impact velocity, available absorber stroke and any drive force that continues pushing into the stop.
- 3
Check duty and environment
Record cycles per hour, ambient temperature, corrosive exposure, side load risk and mounting constraints before selecting the product family.
常见错误
- Using catalog stroke without confirming actual usable machine stroke.
- Ignoring a pneumatic cylinder or motor force that continues to push during deceleration.
- Sizing only by energy per cycle and forgetting energy per hour.
目录来源说明
- The full product catalog p.39 and p.50 list required application data for EI/ED heavy-duty buffers: vertical or horizontal motion, weight, impact velocity, thrust force when needed, cycles per hour, temperature/environment and safety conditions.
从答案进入型号 shortlist。
已有输入参数时可使用选型工具，也可以发送应用数据做工程复核。