EK / EKL Adjustable Hydraulic Shock Absorbers
EK42x50 Adjustable Hydraulic Shock Absorber
EK42x50 adjustable hydraulic shock absorber with 50 mm stroke and 850 Nm/C maximum energy per cycle. Review model dimensions, operating specifications and documents, or request a quote for your application.
- Stroke (mm)
- 50
- Max energy per cycle (Nm/C)
- 850
- Max energy per hour (Nm/h)
- 167000
- Thread size
- M42x1.5
Model specifications
Performance and key specifications
- Stroke (mm)
- 50
- Optimal velocity range (m/s)
- 0.3-3.5
- Max energy per cycle (Nm/C)
- 850
- Max energy per hour (Nm/h)
- 167000
- Max impact force (N)
- 20000
- Max thrust force (N)
- 2890
- Series catalog temperature, optional fluid and seals (°C)
- -40 … 100
- Series catalog temperature, standard configuration (°C)
- -10 … 80
- CMS mounting · Dimension U (mm)
- 25.0
- CMS mounting · Dimension L (mm)
- 250.0
- CMS mounting · Dimension Q (mm)
- 25.4
- CMS mounting · Stroke (mm)
- 50
- CMS mounting · Dimension CR (mm)
- 14.3
- CMS mounting · Dimension T (mm)
- 25.4
- CMS mounting · Dimension S (mm)
- 51.0
- CMS mounting · Dimension V (mm)
- 26.0
- CMS mounting · Dimension W (mm)
- 22.0
Dimensions and mounting
- Total length (mm)
- 195
- Thread size
- M42x1.5
- Dimension WF (mm)
- 40.5
- Dimension K1 (mm)
- 45
- Dimension F (mm)
- 118
- Dimension A1 (mm)
- 213
- Dimension E1 (mm)
- 44
- Dimension K (mm)
- 45
- Dimension E (mm)
- 38
- Dimension D (mm)
- 13
- Dimension WL (mm)
- 19
- Dimension B (mm)
- 58
- Dimension A (mm)
- 195
Selection and installation
Check stroke, energy per cycle and hourly energy together with impact speed, cycle rate, driving force and available installation space. Use external adjustment to match the application; confirm the contact accessory and mounting thread for this model.
Series working principle
The piston forces oil through metering passages to dissipate impact energy. Turning the adjustment knob changes the effective flow area; the return mechanism resets the piston after the load is removed.
Adjustable hydraulic construction
Catalogue cutaway showing the piston, metering path, return spring and external adjustment assembly. The arrows identify component positions rather than measured flow data.
EKD全本样册 · PDF pages 7
Engineering limits to confirm for this model
Published data below describes the model. A missing value needs confirmation; it is never a passed check. Use the cited model drawing and operating conditions when requesting a review.
- Published optimal impact velocity range
- 0.3-3.5 m/s
- Effective mass range
- Not established in the published model data — engineering confirmation required
- Return time
- Not established in the published model data — engineering confirmation required
- Return force
- Not established in the published model data — engineering confirmation required
- Operating temperature
- Series catalog temperature, optional fluid and seals: -40 … 100 °CSeries catalog temperature, standard configuration: -10 … 80 °C
- Allowable side load or angle
- Not established in the published model data — engineering confirmation required
- Maximum impact force
- 20000 N
- Maximum thrust force
- 2890 N
Temperature ranges are series catalog references. Confirm the fluid, seals and ordered configuration; an optional range is not a standard-model rating.
Replacement candidates for referenced models
Model-number relationships are recommendations only. Final selection must be based on the actual operating conditions, mounting and application review.
ACE Controls MA3350
MA / MA-M
Candidate requires mounting changes or dimensional review
- Matched or capacity-qualified fields
- Energy per cycle · Energy per hour · Stroke
- Different or confirmation-required fields
- Body thread · Nominal total length · Impact velocity
Enidine OEMXT 3/4 x 2
OEMXT
Candidate requires mounting changes or dimensional review
- Matched or capacity-qualified fields
- Energy per cycle · Energy per hour · Stroke · Nominal total length
- Different or confirmation-required fields
- Body thread · Impact velocity · Published force limit
Weforma WE-M 1,25 x 2
Mega-Line WE-M 1,25
Candidate requires mounting changes or dimensional review
- Matched or capacity-qualified fields
- Energy per cycle · Energy per hour · Stroke
- Different or confirmation-required fields
- Body thread · Nominal total length · Impact velocity
ACE Controls MA3350M
MA / MA-M
Candidate requires mounting changes or dimensional review
- Matched or capacity-qualified fields
- Energy per hour
- Different or confirmation-required fields
- Energy per cycle · Stroke · Body thread · Nominal total length · Impact velocity
Enidine OEMXT 1.5M x 2
OEMXT
Listed interface values match; performance and drawing review required
- Matched or capacity-qualified fields
- Energy per cycle · Energy per hour · Stroke · Body thread · Nominal total length
- Different or confirmation-required fields
- Impact velocity · Published force limit
ACE Controls MA4550
MA / MA-M
Candidate requires mounting changes or dimensional review
- Matched or capacity-qualified fields
- Energy per cycle · Energy per hour · Stroke · Nominal total length
- Different or confirmation-required fields
- Body thread · Impact velocity
Enidine OEMXT 45M x 2
OEMXT 45M
Candidate requires mounting changes or dimensional review
- Matched or capacity-qualified fields
- Energy per cycle · Energy per hour · Stroke · Nominal total length
- Different or confirmation-required fields
- Body thread · Impact velocity · Published force limit
ACE Controls MA4550M
MA / MA-M
Candidate requires mounting changes or dimensional review
- Matched or capacity-qualified fields
- Energy per cycle · Energy per hour · Stroke · Nominal total length
- Different or confirmation-required fields
- Body thread · Impact velocity
Drawings and documents
Open approved PDFs without signing in. Sign in for DWG and STEP files; request formats that are not yet approved.
Specification sources
Specifications follow the current model catalogue, supported by the referenced catalogue pages and the product database model record.
- EKD full catalogue (Chinese) · pp. 14, 15
- Shock absorber catalogue · pp. 14, 15
- Product database: corresponding model record