Replacement model guide

Weforma WE-M 1,25 x 3 replacement option: EK64x100 comparison

Compare published Weforma WE-M 1,25 x 3 ratings with the EKD EK64x100 candidate and confirm the actual application conditions.

Browse Weforma Mega-Line WE-M 1,25 models

Candidate requires mounting changes or dimensional review Final selection requires operating data and a drawing review.

Published parameter comparison

The table compares published catalog values. A higher rating can identify a performance candidate, but it does not remove mounting, force, reset, environment or application checks.

Parameter	Weforma WE-M 1,25 x 3	EKD EK64x100	Assessment
Energy per cycle	750 J (Nm)	4,520 Nm/C	Meets reported rating A catalog rating comparison only; effective mass, drive force and deceleration remain application checks.
Energy per hour	225,000 J/h	362,000 Nm/h	Meets reported rating Confirm the actual cycle rate and thermal conditions.
Stroke	75 mm	100 mm	Meets reported rating Confirm usable travel, stop position and reset clearance.
Body thread	M32 x 1.5	M64 x 2.0	Different — confirm Different threads require a mounting change or adapter review.
Nominal total length	243 mm	328 mm	Different — confirm Check the drawing reference points, installed envelope and rod-end geometry.
Impact velocity	0.02–6 m/s	0.3–3.5 m/s	Inquiry confirmation required Compare the real operating point, not only the published maximum.

What must be matched and confirmed

Actual moving mass, impact velocity and drive force
Mounting thread, stop geometry and available envelope
Cycle rate, return time and permissible deceleration
Temperature, corrosion, alignment and side loading

Continue with EKD review

Open the EKD candidate, then use the matching tool or send the original nameplate, drawing and application data. EKD will confirm the remaining differences before ordering.

View EKD EK64x100 Open engineering sizing tool Send replacement inquiry

Sources and boundary

Original product source: https://www.weforma.com/fileadmin/pdf/Kataloge/Stossdaempfer/Weforma_Catalog_US_2021_web.pdf

EKD candidate source: https://www.vibroabsorber.com/products/shock-absorbers/ek-adjustable-shock-absorbers/ek64x100

Brand names and model numbers identify the user's existing product for comparison. EKD does not claim the original brand's certification, design ownership or guaranteed interchangeability. Final selection requires application confirmation.