Replacement model guide
Weforma WE-M 1,25 x 1 replacement option: EK42x25 comparison
Compare published Weforma WE-M 1,25 x 1 ratings with the EKD EK42x25 candidate and confirm the actual application conditions.
Browse Weforma Mega-Line WE-M 1,25 modelsEK42x25 is a model-based replacement recommendation. Final selection must be based on actual operating conditions, mounting and application review. Model-number matching is a recommendation only; final selection must be based on actual operating conditions.
Published parameter comparison
The table compares published catalog values. A higher rating can identify a performance candidate, but it does not remove mounting, force, reset, environment or application checks.
| Parameter | Weforma WE-M 1,25 x 1 | EKD EK42x25 | Assessment |
|---|---|---|---|
| Energy per cycle | 300 J (Nm) | 425 Nm/C | Meets reported rating A catalog rating comparison only; effective mass, drive force and deceleration remain application checks. |
| Energy per hour | 120,000 J/h | 126,000 Nm/h | Meets reported rating Confirm the actual cycle rate and thermal conditions. |
| Stroke | 25 mm | 25 mm | Matched reported value Confirm usable travel, stop position and reset clearance. |
| Body thread | M32 x 1.5 | M42 x 1.5 | Different — confirm Different threads require a mounting change or adapter review. |
| Nominal total length | 138 mm | 144 mm | Different — confirm Check the drawing reference points, installed envelope and rod-end geometry. |
| Impact velocity | 0.02–6 m/s | 0.3–3.5 m/s | Inquiry confirmation required Compare the real operating point, not only the published maximum. |
What must be matched and confirmed
- Actual moving mass, impact velocity and drive force
- Mounting thread, stop geometry and available envelope
- Cycle rate, return time and permissible deceleration
- Temperature, corrosion, alignment and side loading
Continue with EKD review
Open the EKD candidate, then use the matching tool or send the original nameplate, drawing and application data. EKD will confirm the remaining differences before ordering.
Sources and boundary
Original product source: https://www.weforma.com/fileadmin/pdf/Kataloge/Stossdaempfer/Weforma_Catalog_US_2021_web.pdf
EKD candidate source: https://www.vibroabsorber.com/products/shock-absorbers/ek-adjustable-shock-absorbers/ek42x25
Brand names and model numbers identify the user's existing product for comparison. EKD does not claim the original brand's certification, design ownership or guaranteed interchangeability. Final selection requires application confirmation.