Replacement model guide
Festo YSR-20-25-C / 34574 replacement option: EN36x50 comparison
Compare published Festo YSR-20-25-C / 34574 ratings with the EKD EN36x50 candidate, including energy, stroke, mounting differences and inquiry checks.
EN36x50 can be evaluated as a replacement option because it meets the compared energy, hourly-duty and stroke thresholds. Mounting, velocity, force, cycle and machine conditions must still be confirmed.
Published parameter comparison
The table compares published catalog values. A higher rating can identify a performance candidate, but it does not remove mounting, force, reset, environment or application checks.
| Parameter | Festo YSR-20-25-C / 34574 | EKD EN36x50 | Assessment |
|---|---|---|---|
| Energy per cycle | 60 J (Nm) | 310 Nm/C | Meets reported rating A catalog rating comparison only; effective mass, drive force and deceleration remain application checks. |
| Energy per hour | 92,000 J/h | 111,000 Nm/h | Meets reported rating Confirm the actual cycle rate and thermal conditions. |
| Stroke | 25 mm | 50 mm | Meets reported rating Confirm usable travel, stop position and reset clearance. |
| Body thread | M26 x 1.5 | M36 x 1.5 | Different — confirm Different threads require a mounting change or adapter review. |
| Nominal total length | 104 mm | 207 mm | Different — confirm Check the drawing reference points, installed envelope and rod-end geometry. |
| Impact velocity | 0.05–3 m/s | 0.08–18 m/s | Inquiry confirmation required Compare the real operating point, not only the published maximum. |
| Published force limit | 3,000 N | 11,120 N max impact force | Inquiry confirmation required The manufacturers may define force ratings differently; verify the machine limit and deceleration curve. |
What must be matched and confirmed
- Actual moving mass, impact velocity and drive force
- Mounting thread, stop geometry and available envelope
- Cycle rate, return time and permissible deceleration
- Temperature, corrosion, alignment and side loading
Continue with EKD review
Open the EKD candidate, then use the matching tool or send the original nameplate, drawing and application data. EKD will confirm the remaining differences before ordering.
Sources and boundary
Original product source: https://ftp.festo.com/Public/PNEUMATIC/SOFTWARE_SERVICE/Documentation/2024/IT/YSR-C_EN.PDF
EKD candidate source: https://www.vibroabsorber.com/products/shock-absorbers/en-non-adjustable-shock-absorbers?model=EN36x50
Brand names and model numbers identify the user's existing product for comparison. EKD does not claim the original brand's certification, design ownership or guaranteed interchangeability. Final selection requires application confirmation.