Replacement model guide
Enidine PRO100IF-1B replacement inquiry and EKD matching checklist
Request an EKD replacement assessment for Enidine PRO100IF-1B. The exact original specification must be confirmed before an EKD candidate is assigned.
No EKD model is assigned from the model name alone. Send the nameplate, drawing and operating data so energy, stroke, mounting and duty can be checked.
Published parameter comparison
The exact original ratings were not established in the reviewed source. The table shows the information required before EKD can assign a candidate.
| Parameter | Enidine PRO100IF-1B | EKD candidate selection | Assessment |
|---|---|---|---|
| Exact model identity | PRO100IF-1B | Confirm before selection | Inquiry confirmation required Suffixes and historic revisions can change dimensions or performance. |
| Energy and hourly duty | Not confirmed in the reviewed source | Calculate from application data | Inquiry confirmation required Provide moving mass, velocity, drive force and cycle rate. |
| Stroke and mounting | Drawing or measurements required | Select after dimensional review | Inquiry confirmation required Provide thread, stroke, total length and stop geometry. |
| Environment | Application data required | Confirm material and seal option | Inquiry confirmation required Include temperature, contamination, corrosion and installation position. |
What must be matched and confirmed
- Clear nameplate photo and complete original model code
- Original drawing or measured dimensions
- Moving mass, speed, drive force and cycles per hour
- Temperature, contaminants, side load and required service life
Continue with EKD review
Use the sizing tool or send the original nameplate, drawing and application data. EKD will select a candidate only after the missing information is confirmed.
Sources and boundary
Official catalog searched; exact model data still pending: https://www.enidine.com/getmedia/b2a382ab-3ee7-4877-8754-5462300da76e/Shock_Catalog.pdf
EKD selection route: https://www.vibroabsorber.com/selector/engineer
Brand names and model numbers identify the user's existing product for comparison. EKD does not claim the original brand's certification, design ownership or guaranteed interchangeability. Final selection requires application confirmation.