Domande di calcolo a cui possiamo rispondere dal know-how prodotto.
Queste pagine trasformano il linguaggio del catalogo in risposte dirette: dati richiesti, formule, controlli, errori comuni e prossimo passo verso dimensionamento o richiesta.
Dalla risposta alla richiesta
Ogni risposta collega strumento tecnico, filtro acquisti o modulo contatto, offrendo un percorso chiaro.
What Data Is Needed for Industrial Shock Absorber Calculation?
A practical checklist of the application data needed before sizing an industrial shock absorber.
How to Calculate Impact Energy for an Industrial Shock Absorber
Use moving mass and impact velocity to estimate the kinetic energy that the absorber must handle per cycle.
How to Check Energy per Hour for Shock Absorber Selection
Why the same absorber can pass single-impact energy but fail under high cycle frequency.
How to Estimate Average Impact Force from Energy and Stroke
A simple way to estimate average stopping force before checking catalog force limits.
How to Size a Shock Absorber for Horizontal Linear Motion
Calculate a horizontal moving mass by kinetic energy, then add drive force if the actuator continues pushing.
How to Size a Shock Absorber for Vertical Motion
Add gravity work when the load moves downward into the absorber and subtract it when gravity opposes the stop.
How to Size a Shock Absorber for Rotary Motion
Convert rotary motion into rotational energy and absorber stroke at the contact radius.
How to Use Shock Absorber Selection Curves
What catalog selection curves mean and how they support model or adjustment-setting checks.
Hai già tutti i dati applicativi?
Passa dalla guida a una shortlist calcolata, oppure invia i dati per una revisione tecnica.